Author: JAMES June 8, 2008 at 15:35:46 from 74.186.190.159
Freshly re-assembled after 12 pulls, 720HP: 72 4-bolt block, C&A .400" long rods, Chev steel crank std/std, 14:1 Probe pistons +.125, Hardblok to water pump, ported & flowed "188" rectangle ports @ 112cc, Howards 660 roller, K-Motion 600# springs good to .850", Manley valves, ready for Jesel shafts - comes with new Harland Sharp, 10 qt pan & H-V pump, Pete Jackson noisy drive, Rattler balancer, etc! No intake/ignition, located in South Florida, $5000 + shipping if necessary. Can install/setup if local. Serious Inquiries E-Mail questions.
